Subaru 2008 IMPREZA - Manual (Page 344)

11-52
Maintenance and service
2. Turn the bulb socket counterclockwise
and remove it.
3. Pull the bulb out of the bulb socket and
replace it with a new one.
4. Install the bulb socket by turning it
clockwise. Install the light cover on the
rear gate.
& License plate light
1. Insert a finger into the right side of the
license plate light cover, then press once
to the left and pull out to remove the cover.
2. Turn the bulb socket counterclockwise
and pull out the socket.
3. Pull the bulb out of the socket. Install a
new bulb.
4. Reinstall the license plate light cover.
& Dome light, map light and
cargo area light