Passive arming – Subaru 2004 Impreza User Manual

Page 121

Advertising
background image

2-18

Keys and doors

chirp is emitted.

!

Passive arming

When passive arming mode has been programmed by

the dealer, arming of the system is automatically ac-

complished without using the remote transmitter. Note

that in this mode, DOORS MUST BE MANUALLY

LOCKED.

! To enter the passive mode

0

1. Remove the side sill cover on the driver’s side.

1) Open the driver’s door.

2) Remove the two clips fastening the front portion

of the cover with a screwdriver.

3)Remove the side sill cover by pulling it up.

1) Connector for SRS airbag system (yellow)
2) White (1P)

2. Connect the white (1 pole) connector.

3. Turn the ignition switch from the “LOCK” to the

“ON” position.

4. Install the side sill cover.

To place the system in active arming mode (remote re-

quired for activation), disconnect the white connector.

Do not disconnect or tamper with any yellow

HS2022BA

1

2

HS2023BB

Advertising