Subaru 2004 Impreza User Manual

Page 234

Advertising

5-21

Audio

– CONTINUED –

FM1 or FM2 reception.

2. Press the “SCAN” button (3) or tune the radio man-

ually until the desired station frequency is displayed.

3. Press one of the preset buttons (5) for at least 1.5

seconds to store the frequency. The frequency of the

station will flash once on the display at this time. If the

button is pressed for less than 1.5 seconds, the pre-

ceding selection will remain in memory.

NOTE

If the connection between the radio and battery is

broken for any reason such as vehicle mainte-

nance or radio removal, all stations stored in the

preset buttons are cleared. If this occurs, it is nec-

essary to reset the preset buttons.

Advertising