NISSAN 2009 Titan User Manual
Page 43
![background image](/files/764057/content/doc043.png)
1. Pull strap
2. Anchor point location
To access the anchor points behind the rear
bench seat, tilt the rear seatback forward by
lifting up on the pull strap behind the seatback.
Installing top tether strap
1. Top tether strap
2. Hook
3. Anchor point
Install the top tether strap as follows:
1. Raise the head restraint.
2. Position the top tether strap over the top of
the seatback and under the head restraint.
3. Secure the tether strap to the tether anchor
point on the seat directly behind the child
restraint.
4. Tighten the tether strap according to the
manufacturer’s instructions to remove any
slack.
For best child restraint fit, see the child restraint
installation instructions in this section and the
child restraint manufacturer’s instructions.
Anchor point access
LRS0392
WRS0423
Safety—Seats, seat belts and supplemental restraint system
1-27
੬
REVIEW COPY—
2009 Titan (tzw)
Owners Manual—USA_English (nna)
02/19/08—tbrooks
੭