How to use remote keyless entry system -6 – NISSAN 2009 Xterra User Manual

Page 130

Advertising
background image

The keyfob will not function when:

● the battery is discharged
● the distance between the vehicle and the

keyfob is over 33 ft (10 m)

The panic alarm will not activate when the

key is in the ignition switch.

CAUTION

Listed below are conditions or occur-

rences which will damage the keyfob:
Do not allow the keyfob to become wet.
Do not drop the keyfob.
Do not strike the keyfob sharply against

another object.

Do not place the keyfob for an extended

period in an area where temperatures

exceed 140°F (60°C).

If a keyfob is lost or stolen, NISSAN rec-

ommends erasing the ID code of that key-

fob. This will prevent the keyfob from un-

authorized use to unlock the vehicle. For

information regarding the erasing proce-

dure, please contact a NISSAN dealer.

HOW TO USE REMOTE KEYLESS

ENTRY SYSTEM
Locking doors

1. Close all windows.
2. Remove the key from the ignition switch.
3. Close the hood and all doors.

4. Push the

button on the keyfob. All

the doors lock. The hazard warning lights

flash twice and the horn beeps once to

indicate all doors are locked.

● When the

button is pushed with

all doors locked, the hazard warning lights

flash twice and the horn beeps once as a

reminder that the doors are already

locked.

● If a door is open and you push

the

button, the doors will lock

but the horn will not beep and the hazard

lights will not flash.

The horn may or may not beep. Refer to “Silenc-

ing the horn beep feature” later in this section for

details.

LPD0209

3-6

Pre-driving checks and adjustments

REVIEW COPY—

2009 Xterra (xtr)

Owners Manual—USA_English (nna)
05/21/08—debbie

Advertising