Installing front license plate -11 – NISSAN 2009 Xterra User Manual
Page 305
TIRE AND LOADING INFORMATION
LABEL
The cold tire pressure is shown on the Tire and
Loading Information label. The label is located as
shown.
AIR CONDITIONER SPECIFICATION
LABEL
The air conditioner specification label is affixed to
the underside of the hood as shown.
Use the following steps to mount the front license
plate:
1. Make a shallow hole in each plastic finisher
at the location mark (small dimple) using a
0.31 in (8 mm) drill. To avoid damaging the
threads behind the finisher, apply only light
pressure to the drill.
2. Mount the license plate bracket using two 8
mm slotted hex head screws.
WTI0100
WTI0167
LTI0137
INSTALLING FRONT LICENSE PLATE
Technical and consumer information
9-11
੬
REVIEW COPY—
2009 Xterra (xtr)
Owners Manual—USA_English (nna)
06/10/08—debbie
੭