NISSAN 2009 Altima - Manual (Page 233)

Bluetooth Setup:
See the following information for each item.
● Bluetooth Hands-Free:
If this item is turned off, the connection be-
tween the cellular phone and the in-vehicle
phone module will be canceled.
● Paired Phone List:
Up to 5 registered cellular phones are
shown on the list.
● Pair Phone:
See “Pairing Procedure” in this section.
● Priority Change
If multiple phones are registered to the sys-
tem, you can change the priority of the
phones on the shown list.
● Remove Paired Phone:
Delete a registered cellular phone from the
paired list.
● Bluetooth Info.:
Check information about the device name,
vehicle name, device address device PIN
and connection status.
● Edit Phone Name:
If you would like to change the way your
phone’s name is displayed select this key, a
character input screen will be displayed.
The NISSAN Voice Recognition system allows
hands-free operation of the systems equipped on
this vehicle, such as the phone and navigation
systems.
To operate NISSAN Voice Recognition, press
the
button located on the steering wheel.
Then speak the command for the system you
wish to activate. The command given is picked up
by the microphone, and it is performed when it is
properly recognized. At this time NISSAN Voice
Recognition will provide a voice and message (in
the center display) to inform you of the command
results.
USING THE SYSTEM
Initialization
When the ignition switch is in the ON position,
NISSAN Voice Recognition is initialized, which
takes a few seconds. When completed, the sys-
tem is ready to accept voice commands. If
the
button is pressed before the initializa-
tion completes, the display will show the mes-
sage: “Phonetic data downloaded. Please wait.”
LHA1011 LHA1012
NISSAN VOICE RECOGNITION
SYSTEM (if so equipped)
Monitor, climate, audio, phone and voice recognition systems 4-69
੬
REVIEW COPY— 2009 Altima (alt)
Owners Manual—USA_English (nna)
09/08/08—debbie
੭