NISSAN 2009 Altima - Manual (Page 45)

● Inspect the lower anchors by inserting
your fingers into the lower anchor area
and feeling to make sure there are no
obstructions over the LATCH anchors,
such as seat belt webbing or seat cush-
ion material. The child restraint will not
be secured properly if the LATCH an-
chors are obstructed.
Front-facing
Follow these steps to install a front-facing child
restraint using LATCH system:
1. If the rear seat cushion has a flap
᭺
1 , pull the
flap down to allow access to the anchors
᭺
2 .
2. Position the child restraint on the seat. Al-
ways follow the child restraint manufactur-
er’s instructions.
3. Secure the child restraint anchor attach-
ments to the LATCH lower anchors. Check
to make sure the LATCH attachment is prop-
erly attached to the lower anchors.
4. The back of the child restraint should be
secured against the vehicle seatback.
If necessary, adjust or remove the head restraint
to obtain the correct child restraint fit. See “Head
restraints” earlier in this section.
If the head restraint is removed, store it in a
secure place. Be sure to reinstall the head re-
straint when the child restraint is removed.
(if so equipped)
LRS0824
Front-facing web-mounted – step 3
WRS0799
Safety—Seats, seat belts and supplemental restraint system 1-27
੬
REVIEW COPY— 2009 Altima (alt)
Owners Manual—USA_English (nna)
09/08/08—debbie
੭