Setup | advanced, User controls – Optoma HD50 User Manual
Page 51
Advertising

English
51
User Controls
Setup | Advanced
N
ote
N
ote
When Power Mode
(Standby) is set to
Eco, RS232 will be
deactivated when
the projector is in
standby.
Auto Power Off (min)
Set the Auto Power Off interval. The projector powers
off the lamp after 30 minutes of no signal by default. The
following warning is displayed 60 seconds before power off.
Sleep Timer (min)
Set the Sleep Timer interval. The projector powers off after
the specified time period of inactivity (regardless of signal).
The following warning is displayed 60 seconds before
power off.
Power Mode (Standby)
Eco.: Choose “Eco.” to save power dissipation further <
0.5W.
Active: Choose “Active” to return to normal standby.
Advertising