Dukane P50 - Manual (Page 10)

2
En
English
Before Proceeding
1 Press MENU to display the menu screen.
MAIN MENU INPUT1
SELECT ENTER EXIT SET MENU
PICTURE SCREEN SET UP OPTION
: 0
: 6 +
+
+ 0
: 6 0
: 6 0
: 0
: 0
C O N T R A S T : 0
B R
R L E V E L
I GH T .
.
G L E V E L .
B L E V E L .
H E NH AN CE .
V E NH AN CE .
R S E T E
2 Press 3 to select SCREEN.
SELECT ENTER EXIT SET MENU
PICTURE SCREEN SET UP OPTION
: 0 0
P O S I T I O N
C L OC H A S E K / /
: 0 0 /
P
R S E T E
MAIN MENU INPUT1
3
Press 5/∞ to select the item to be adjusted.
SELECT ENTER EXIT SET MENU
PICTURE SCREEN SET UP OPTION
: 0 0
P O S I T I O N
C L OC H A S E K / /
: 0 0 /
P
R S E T E
MAIN MENU INPUT1
4
Press SET to display the adjustment screen for the
selected item.
ADJUST
SET
EXIT
SET
MENU
P O H . S I T I O N : 0
P O V . S I T I O N : 0
5
Press 5/∞/2/3 to adjust the value.
Before Proceeding
How to Use This Manual
This manual is set up to follow the course of actions and
operations in the order that would seem most logical for
someone setting up this unit.
Once the unit has been taken out of the box, and it has
been confirmed that all the parts have been received, it
may be beneficial to look over the section “Part Names
and Functions” starting on page 4 to become acquainted
with the plasma monitor and remote control unit, as their
respective buttons and controls will be referred to
throughout this manual.
The section “Installation and Connections” starting on
page 8 covers all the necessary points regarding
installation of the plasma display and connections to a
wide variety of components.
The section “Setting Up the System” starting on page 14
covers the necessary on-screen menu settings to
establish correct linkage between the plasma display and
connected components. Depending on the connections
made, this section may or not be necessary.
The remainder of the sections in this manual is dedicated
to the basic operations associated with selecting a source
component up to the more complex operations
associated with adjusting the plasma display picture to
match the requirements of specific components and
personal preferences.
About operations in this manual
Operations in this manual are outlined in step by step
numbered procedures. Most of the procedures are
written in reference to the remote control unit unless the
button or control is only present on the main unit.
However, if a button or control on the main unit has the
same or similar name as that on the remote control unit,
that button can be used when performing operations.
The following example is an actual operation that shows
how one might set the horizontal and vertical positions of
the screen. The screens shown at each step are provided
as a visual guide to confirm that the procedure is
proceeding as it should. Please familiarize yourself with
this process before continuing on with the rest of this
manual.
Note
The screen displays depicted in this manual represent typical
display examples.
The actual items and contents seen in screen displays may vary
depending on input source and specific settings.