Dukane P50 - Manual (Page 15)

7
En
Part Names and Functions
English
Part Names and Functions
8
Synchronizing signal impedance selector switch
Depending on the connections made at INPUT2, it
may be necessary to set this switch to match the
output impedance of the connected component’s
synchronization signal.
When the output impedance of the component’s
synchronization signal is below 75
Ω
, set this switch
to the 75
Ω
position (pages 9, 11).
9
AUDIO INPUT (Stereo mini jack)
Use to obtain sound when INPUT1 or INPUT2 is
selected.
Connect the audio output jack of components
connected to INPUT1 or INPUT2 to this unit (page 11).
0
AUDIO OUTPUT (Stereo mini jack)
Use to output the audio of the selected source
component connected to this unit to an AV amplifier
or similar component (page 11).
1
~ = -
2 3 4 5 6 7 89 0
L
IN OUT
CONTROL COMBINATION
IN OUT
RS-232C
ANALOG RGB (ANALOG RGB)
INPUT1
OUTPUT G B R HD VD
(ON SYNC) (H/V SYNC)
Ô 75 2.2 Ω k Ω
INPUT
(INPUT1/2)
OUTPUT
AC INLET
SPEAKER
8 Ω ~16 Ω
+ –
R
SPEAKER
8 Ω ~16 Ω
+ –
INPUT2 AUDIO
-
MAIN POWER switch
Use to switch the main power of the unit on and off.
=
AC INLET
Use to connect the supplied power cord to an AC
outlet (page 12).
~
SPEAKER (L) terminal
For connection of an external left speaker. Connect a
speaker that has an impedance of 8 -16
Ω
(page 11).