Adjustment, Electronic speed control - if equipped, Electronic speed control — if equipped – Dodge 2008 Ram 4500 User Manual

Page 141

Advertising
background image

Adjustment

1. Position the driver seat so that you are at least 10 in
(254 mm) away from the airbag located in the center of
the steering wheel.

2. Fasten and adjust the seatbelts.

3. Move the adjustable pedal switch, located to the left of
the steering column near the parking brake release, in the
direction you desire to move the pedals.

4. The pedals cannot be adjusted when the vehicle is in
REVERSE or when the Electronic Speed Control is SET.

CAUTION!

Do not place any article under the adjustable pedals
or impede its ability to move as it may cause damage
to the pedal controls. Pedal travel may become lim-
ited if movement is stopped by an obstruction in the
adjustable pedal’s path.

ELECTRONIC SPEED CONTROL — IF EQUIPPED

When engaged, this device takes over accelerator opera-
tion at speeds greater than 35 mph (56 km/h). The
controls are mounted on the steering wheel.

Electronic Speed Control Buttons

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

139

3

Advertising
This manual is related to the following products: