To unlock the doors – Dodge 2008 Ram 4500 User Manual

Page 24

Advertising
background image

To unlock the doors:

Press and release the UNLOCK button on the Remote
Keyless Entry (RKE) transmitter once to unlock only the
driver’s door or twice to unlock all the doors. When the
UNLOCK button is pressed, the illuminated entry will
initiate, the parking lights will flash on twice and if
installed, the cargo lamp will turn on for 30 seconds.

The system can be programmed to unlock all the doors or
the driver’s door only upon the first UNLOCK button
press by using the following procedure:

• For vehicles equipped with the Electronic Vehicle

Information Center (EVIC), refer to “Personal Settings
(Customer Programmable Features)” under “Over-
head Console with Electronic Vehicle Information
Center (EVIC) – If Equipped” in Section 3.

• For vehicles not equipped with the EVIC, perform the

following procedure:

1. Perform this operation while standing outside the
vehicle.

2. Press and hold the LOCK button on your RKE trans-
mitter.

3. Continue to hold the LOCK button at least four
seconds, but no longer than 10 seconds, then press and
hold the UNLOCK button while still holding the LOCK
button.

4. Release both buttons at the same time.

5. This will enable you to unlock all doors on the first
press of the UNLOCK button.

6. To reactivate this feature, repeat the above steps.

22

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising
This manual is related to the following products: