Using the scanner, Documents – Canon DR-5010C User Manual
Page 44
42
Using the Scanner
Using the Scanner
Documents
This scanner can scan documents ranging in size from business cards and
checks to 11.6" x 17"/A3 size documents. The size of documents that can be
scanned is shown below.
Eject Direction (*1)
U-Turn Path
Straight Path
Width
2.08" to 11.8"
2.08" to 11.8"
(53 mm to 300 mm)
(53 mm to 300 mm)
Length
2.75" to 17"
2.75" to 17"
(70 mm to 432 mm)
(70 mm to 432 mm)
Weight (*2)
Feeding documents
14 to 32 lb bond
14 to 32 lb bond
are separated
(52 to 128g/m
2
)
(52 to 128g/m
2
)
0.0024" to 0.0059"
0.0024" to 0.0059"
(0.06 mm to 0.15 mm)
(0.06 mm to 0.15 mm)
Feeding documents
11 to 40 lb bond
11 to 144 lb bond
are not separated
(42 to 157g/m
2
)
(42 to 546g/m
2
)
0.0020" to 0.0079"
0.0020" to 0.026"
(0.05 mm to 0.20 mm)
(0.05 mm to 0.66 mm)
Business cards
Cannot be scanned
Can be scanned
(not separated)
Size: 2.12" x 3.37"
(53.9 mm x 85.5 mm)
Thickness: 0.03" ± 0.003"
(0.76 ± 0.08 mm)
without embossing
(*1) For information about eject directions, see “Document Eject Tray,”
on p. 45.
(*2) For information about feeding documents, see “Placing a Document for
Scanning,” on p. 49.
IMPORTANT
A document must meet the following criteria to be scannable:
• When scanning a multi-page document, pages must be grouped together so
that they have the same size, thickness, and weight. Scanning different types
of paper at one time can cause the scanner to jam.
• Scanning documents before the ink is dry can cause problems with the
scanner. Always make sure that the ink on a document is dry before
scanning it.