Canon DR-5010C User Manual
Page 45
Using the Scanner
43
• Scanning documents that are written in pencil or similar material can make
the rollers dirty, which can then transfer the dirt to subsequent documents.
Always clean the rollers after scanning a document written in pencil.
• When scanning a two-sided document that is printed on thin paper, the
image on the opposite side of each page may show through. Adjust the
scanning intensity in the application software before scanning the
document.
• Scanning the following types of documents can cause a paper jam or
malfunction. To scan such a document, make a photocopy of the document
and then scan the photocopy.
• When you scan a batch of NCR documents, make sure that they are not
stuck together.
• Note that glossy originals or card originals sometimes cannot be scanned
correctly, or functions such as Paper Size Detection and Deskew do not
function properly due to reflected light.
• When scanning business cards, make sure to select nonseparation feed and
Straight Path.
CAUTION
The results of scanning embossed cards are not guaranteed. Note
that scanning embossed cards may scratch the sensor glass.
Embossed Cards
Wrinkled or
creased
documents
Curled
documents
Torn
documents
Documents
with paper
clips or
staples
Carbon
paper
Coated
paper
Extremely
thin,
translucent
paper