ABUS Technologies UI Series of Big Digit Process Indicator - Manual (Page 7)

ABUS TECHNOLOGIES INC.
7
UI
6.2 Panel
Panel Attributes
S.No. Parameters Description
1 LED Measured value (PV).
2 LED Programming Display (SV).
3 AL1 Indication lamps for Alarm 1- On: Output Off: No Alarm
4 AL2 Indication lamps for Alarm 2- On: Output Off: No Alarm
5 OUT Select / Confirm key / Analogue Output.
6 SET Set Key ( Press SET key for 5 seconds to enter programming mode ).
7 «/Rst Shift / Clear / Reset key
8 Up Key
9 Down Key