Alto Professional HPA6 User Manual
Page 4
4
APPLICATIONS
USING THE MAIN INPUT CONNECTORS
1.
Connect your source to the rear panel Main Input connectors on HPA6.
2.
Set the Input Gain (Main section) and the Balance control (Channel section) on center position. Set the
Output gain of each channel all the way down.
3.
Check the input level meter for optimal signal.
4.
Connect headphones to HPA6 and start to raise the output gain of each channel to the desired listening
volume.
USING THE AUX INPUTS
You can also play back a signal to feed in a vocal microphone and then connect a mixer’s aux send to
HPA6’s Aux Input. Use the Balance control to give the vocalist the desired mix between the voice and the
playback signal. Then, adjust the Output Gain control to regulate the overall desired volume.
Main
Outputs
Aux Send
Main
Out