American Weigh Scales (AWS) CG2-500 User Manual
Page 3
I. OPERATION
Place Scale on a horizontal flat surface.
1. Press [ ] key.
2. Wait until "0.0” or "0.00" is displayed.
3. Place the object(s) on the weighing platform.
4. By pressing the [
MODE
] key, you can switch
between weighing units.
5. The back-light can be turned on or off using the
[
LIGHT ] key.
II. TARE WEIGHING
1. Turn on scale as described above.
2. Place a tray or container on the scale platform.
3. Press [
TARE
] and wait until "0.0" or "0.00" is
displayed.
4. You can now add items to the container or tray to
obtain just the weight of the contents.
III. COUNTING FEATURE
All items must be of uniform weight for the counting
feature to work.
1. Turn on scale as described above.
2. Place a sample count of the items you want to
weigh on the platform. Available sample counts are 25,
50, 60, 75, 100.
3. Press and hold the [ PCS] button until you see
"pcs" flash in the top right corner, and a sample count
displayed.
4. Press mode until the display shows the sample
count which you have placed on the platform, then