Dell S300w User Manual
Page 53
Advertising
Using Your Projector
53
In order to use your projector wirelessly, you need to complete the steps below:
1
Install the wireless antenna. See "Installing the Antenna" on page 10.
2
Enable wireless connection on the projector. See "WIRELESS / NETWORK"
3
Set the Input Select menu then select the Multiple Display to Wireless display.
See "INPUT SELECT" on page 35. The
Wireless Guide Screen shown below
appears:.
4
Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP
ADDRESS. You will need these information to login later.
5
Connect your computer to the S300w network.
Advertising