Installation, 8pin rj 45 modular jack, Video out – deXlan 047200 User Manual
Page 10: Camera selection, Network connection, Alarm/relay/ptz connection, Power connection
10
②
③ ④ ⑤
⑥
①
• Installation
1. 8pin RJ 45 Modular Jack
Camera in (BNC/RCA/DIN)+ Audio in (RCA/DIN) + Power + RS-485
•Default : Camera (BNC) + Audio (RCA)
•Optional Cable Selection (refer to page. 48 )
2. Video Out
Connect DC Power Input Terminal and Static Adaptor
3. Camera Selection
Switch to change video mode NTSC/PAL
4. Network Connection
Connect Ethernet Terminal and Network Cable
5. Alarm/Relay/PTZ Connection
Connect Port for Sensor & Relay, PTZ
6. Power Connection
DC 12V, 5A (For observation kit with camera (DIN Cable) : 8A adaptor is needed)
① ALARM
Alarm Input - ‘IN1, IN2, IN3, IN4’ : Connect Sensor Input by Channel
‘GND’ : Connect Ground System
② RELAY
Alarm Output – ‘NO, NC’ : After Checking Alarm Output Type (Normal Open or Normal Close) and Connect to ‘NO, NC’
‘COM’ : Connect Remain Grounding Conductor
③ RS-485
Connect PTZ Camera – ‘D+, D-’ : Connect PTZ Camera Control Line (+ , – Terminal)
PTZ 14 Pin Cable
⑨
R+
⑩
R-
⑪
T+
⑫
T-
RS485
D+
D-
IN1
IN2
ALARM
RELAY
RS-485
IN3
IN4
GND
NO COM
NC
D+
D-