deXlan 047200 - Manual (Page 20)

20
• MENU
Tip
Overlimit Recording Capacity
• Size : 352*240, 720*240, 720*480
Rec.Rate : Possible to Select (1~30)
Quality : Possible to Select 3 levels
(Highest, High, Low, Standard)
• Indicate Frame No. to Control Size & Rec. Rate
• If Frame Over, Showing a Message ‘Overlimit Recording
Capacity’ and Impossible to Change Size & Rec. Rate
• When Setup Refer to Below NTSC, PAL Type
NTSC : 352*240(30fps), 720*240(15fps), 720*480(7fps)
PAL : 352*288(25fps), 704*288(12fps), 704*576(6fps)
• Possible to Setup Size & Rec. Rate, Quality per Each Channel
• When Apply Change Setup, Press Enter, When Cancel Change Setup, Press Return.
2.2 Timer Recording Setup – Record On/Off or Time, Motion Setup
• Camera : Indicate Camera No. to Setup
• Record : Record On/Off
• Start : Setup Recording Start Time (0~24 hr)
• Stop : Setup Recording Finish Time (0~24 hr)
* Recording Time is between Start Time and Finish Time.
• Motion : Motion Detection Recording On/Off
(Record Setup must be ‘On’, for Motion Detection Recording)