COMMELL FS-A71 - Manual (Page 16)

FS-A71 User’s Manual
-15-
2.4.2 <Memory installation>
FS-A71 has two 240-pin DDR2 DIMM support up to 3GB of memory capacity. The memory
frequency supports 533/667MHz. Only Non-ECC supported unbuffered memory is
supported only. Supports interleaved addressing in dual-channel memory configurations
even when the two channels have unequal amounts of memory populated. This is called
Intel
®
Flex Memory Technology. Flex memory provides higher performance with different
sized channel populations than “Asymmetric” mode (where no interleaving is used) by
allowing some interleaving.
DDRIIA/B
112-pin 128-pin
Please check the pin number to match the socket side well
before installing memory module.