COMMELL FS-A71 - Manual (Page 18)

FS-A71 User’s Manual
-17-
2.6 <Enhanced IDE Interface>
The board has one Ultra ATA100 IDE interface to support up to 2 ATAPI devices, or one
ATAPI device and Compact Flash Type II socket, with jumper JCFSEL for IDE master/slave
mode selection. And provide JVCF jumper to set +3.3V or +5V.
Jumper: JCFSEL
Type: onboard 3-pin header
JCFSEL Mode
1-2 Master
2-3
Slave
Default setting: 2-3
Jumper: JVCF
Type: onboard 3-pin header
JVSSD Mode
1-2 +5V
2-3 +3.3V
Default setting: 1-2
1
3
1
3
1
3
JVCF
JCFSEL