COMMELL FS-97C - Manual (Page 33)

FS-97C User’s Manual Hardware Setup
Serial Port Jumper Setting 33
2.13 <Power and Fan Installation>
The board comes with a 4-pin AT power connector for powering the board, three fan
connectors for Northbridge, CPU and system. The board also provides a 3-pin ATX function
connector. You can just connect the two power connectors without any backplane to work.
2.13.1 <Power connectors>
Connector: DC_IN
Type: 4-pin P-type connector for +5V/+12V input
Pin Description Pin Description Pin Description Pin Description
1 +12V 2 Ground 3 Ground 4 +5V
Connector: CN_PS
Type: 3-pin ATX function connector
Pin Description Pin Description Pin Description
1 5V Standby 2 Ground 3 Power On
1
10
CN_COM1/2 JCSEL1
JCSEL2