COMMELL LE-37D - Manual (Page 30)

30
2.15 <Switch and Indicator>
The JFRNT provides front control panel of the board, such as power button, reset and
beeper, etc. Please check well before you connecting the cables on the chassis.
Connector: JFRNT
Type: onboard 10-pin (2 x 5) 2.54-pitch header
Function Signal PIN Signal
Reset Reset- 10 9 Reset +
Power LED PWRLED+ 8 7 PWRLED-
HDD LED HDLED+ 6 5 HDLED-
Speaker SPK + 4 3 SPK-
Power PWRBT + 2 1 PWRBT-
Chapter 3 <System Setup>
3.1 <Audio Configuration>
The board integrates REALTEK® ALC262 code. It can support 2-channel sound under
system configuration. Please follow the steps below to setup your sound system.
1. Install REALTEK HD Audio driver.
2. Lunch the control panel and Sound Effect Manager.