COMMELL LE-37D - Manual (Page 36)

36
Appendix B <Flash BIOS>
B.1 <Flash Tool>
The board is based on Phoenix BIOS and can be updated easily by the BIOS auto
flash tool. You can download the tool online at the address below:
http://www.commell.com.tw/Support/Product%20Technical%20Support/LE-37D.htm
The utility that can write the data into the BIOS flash ship and update the BIOS.
B.2 <Flash BIOS Procedure>
1.Extract the zip file(re-flash tool and BIOS file) to root of the USB flash
drive.
2.Insert your USB flash drive in USB port of the board and power
on the system.
3. Boot to EFI-Shell mode ( UEFI Boot Enable, Legacy Boot Disable)
then input the “fs0:” command to switch to the root of the USB flash
drive.