COMMELL LS-371E - Manual (Page 18)

LS-371 User’s Manual
18
2.5 <CMOS＆ATX Setup>
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate
CMOS settings, here is how to proceed to clear (reset) the CMOS to its default values.
Jumper: JRTC
Type: Onboard 3-pin jumper
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting
Jumper: JAT
Type: onboard 2-pin header
JAT Mode
Open ATX Mode
Short AT Mode
Default setting
JRTC
1
3
JAT