COMMELL LV-67A - Manual (Page 22)

LV-67A User’s Manual
22
2.9 <Onboard Display Interface>
Based on Intel Q45 chipset with built-in graphics, the board provides one DB15 Connector
on real external I/O port, or optional Secondary CRT connector (LV-67AT) and One 40-pin
LVDS interface with 5-pin LCD backlight inverter connector. (LV-67AX)
The board also provides 26-pin DVI interface (LV-67AD) or two DVI interface (LV-67AD2)
Notice: When you install any PCI Graphic card, the onboard graphics would be disabled
automatically.
2.9.1 <Analog Display>
Please connect your CRT or LCD monitor with DB15 male connector to the onboard DB15
female connector on rear I/O port or optional Secondary CRT connector Dip 10 Pin
(LV-67AT)
Connector: CN_CRT2
Type: onboard 10-pin connector for CRT2 (Pitch = 2.00 mm)
Pin Signal Pin Signal
2 CRT2 DDC_DA 1 CRT2 DDC_DC
4 CRT2 R 3 GND
6 CRT2 G 5 CRT2 B
8 CRT2 HSYNC 7 CRT2 VSYNC
10 GND 9 GND
CRT1
CN_CRT2
1
2
9
10