COMMELL MPX-2515 - Manual (Page 18)

Commell MPX-2515 User’s Guide Rev 0101
Taiwan Commate Computer Inc. 18
Figure 12 I/O Ports and Jumper
• Mini card golden finger - The USB signals of this industrial standard mini-
PCIe interface are used to connect to a USB host.
• CN_USB connector - The connector for connecting to a USB host by cable.
Please refer to its corresponding section for detail information.
• J1 - The Line Termination jumper.
• CN_CAN connector - The connector for connecting to the CAN bus.
• CN_ISSP connector - The connector for firmware uploading.
1.8.1 Mini Card Golden Finger
The MPX-2515 CAN 2.0B USB card implements only the USB D+ and USB D-,
ground, and 3.3V voltage supply of the mini card golden finger. Users can use this
mini card golden finger to connect to a USB host of the motherboard.
The following figure shows the location of golden finger of MPX-2515 card.
Figure 13 MPX-2515 Golden Finger