COMMELL MPX-2515 - Manual (Page 23)

Commell MPX-2515 User’s Guide Rev 0101
Taiwan Commate Computer Inc. 23
Please refer to the OAL-2515 Cable section for cable information.
1.8.5 CN_ISSP Connector
CN_ISSP connector is used to upload MPX-2515 firmware. MPX-2515 users are
normally not using this connector.
Figure 20 CN_ISSP Connector
1.9 MPX-2515 Card Properties
This section describes all other properties that are not listed above.
1.9.1 USB Properties
This sub-section defines MPX-2515 card USB properties, which include device
identifier, device attribute, and endpoints.
• Vendor ID = 0xCECE
• Product ID = 0x2515
• USB Device Instance Id: USB\VID_CECE&PID_2515\1234567, for example.