COMMELL MP-840 - Manual (Page 14)

MP-840
13
3) If the program is activated, 4ch display screen will be come out as a
default.
4) The right part of display is composed of Display mode, Reset & Exit,
Display set block.
5) The below [1]~[4] button of Display is for channel choice.
6) The below number of channel choice button means frame per second
of each channel compressed and if the capture start, put a mark frame
number which is captured.
7) The Show, Hide block in the right-below part could activate or disable
detailed setting dialogs.
1.6.1 <Display Mode>
1) The screen displayed is controlled by Display Mode.
2) If it choose [1 Display], it comes out 720x480 size for just one channel
in display screen and in this time, the channel could be changed by
pressing [CH Down], [CH Up] button and also choose channel by
pressing [1]~[4] button.
3) [1 Display] [4 Display], could choose the channel in the same way.
1.6.2 <Search>
1)This button to playback the record file