COMMELL MP-840 - Manual (Page 17)

MP-840
16
1.7 <Demo program menu expansion>
1.7.1 <General>
1) There are [General], [Camera], [Codec], [Register], [Color], [OSD], [Motion],
[Audio], [Network] tap in expansion-menu.
2) You could NTSC and PAL in [General] tap.
3) Default is NTSC, if you want change from NTSC to PAL, choose [PAL-B]
and press [All Reset] button.
4) You could choose Hard disk drive in [Save Drive]. Default is C Drive.
1.7.2 <Camera>
1) [Camera] : You can check the tab-settings through Rec in [Display] of main
screen. User can use this image when the user does Network transmit.
2) Each channel could set the resolution.
3) All channel is set 720x480 (D1) resolution as a default. (NTSC).