CONTA-CLIP GSM-PRO Portal - Manual (Page 15)

GSM-PRO PORTAL
- 14 -
5
CONTROL
5.1
Set outputs
The digital outputs can be controlled by module or by a (selected) broadcast to all modules.
The digital outputs can be set for a given time from 1 to 36000 seconds. When this command is received, the DO
sets to 1 and after the number of seconds the DO falls back to 0. The one shot function is called by selecting a
DO and choose the number of seconds.
5.1.1
Single module
Click on the LED of a digital output to toggle:
Or right click on the LED of a digital output to perform a one shot. Fill the time in seconds and hit enter: