d&b Z5024 Loudspeaker stand adapter - Manual (Page 3)

Z5024 Mounting instructions (5.0E) Page 3 of 6
Z5024 Loudspeaker stand adapter
This adapter is used to mount loudspeakers on to the standard
35 mm diameter column commonly used for loudspeaker stands.
− Direct assembly to E1 or E3 loudspeakers
− Direct assembly to 2 x E3 using Z5031 E3 Standard bracket
− Z5023 02 Flying bracket
− Z0124 E1 Vertical bracket
− Z0126 E1 Horizontal bracket
− Z5032 E3 Swivel bracket
− Z5028 E3/Ci80 Horizontal bracket
− Z5030 E3 x 2 Angle bracket
− Z5052 Flying bracket CI6/CI9
− Z5150 Q Swivel bracket
Safety instructions
WARNING! Installation should only be carried out by fully
trained personel. There are certain rules for
installation that must be complied with.
The adapter must never be used to suspend a
loudspeaker cabinet.
The handbolt fitted to the adapter is not intended to
fully secure the adapter to the stand column - it is
provided only to lock the loudspeaker cabinet to a set
horizontal angle and prevent it from turning.
Secondary safeties must always be provided and used
when flying or fixing loudspeaker loads overhead.
Load safety information
WARNING! The maximum permitted safe working load (SWL) for
this adapter is 40 kg and this value must on no
account ever be exceeded.
Additionally, the load force must only act vertically on
the fixing plate - any type of shear load must be
avoided.
Also ensure that the maximum permitted safe
working load (SWL) for the loudspeaker stand used
with the adapter is not exceeded.