d&b Z5038 Fixing plate M10 - Manual (Page 3)

1.1. Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
Qty. d&b Code Description
1 Z5038 Fixing plate M10
Including:
1 D2963 Mounting instructions
1.2. Safety precautions
General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case you have any doubt as to the proper
functioning and safety of the items, do not use them.
Load safety information
The maximum permitted working load of the Z5038 Fixing plate
M10 is 2.5 kg (5.5 lb) (according to BGV C1).
1.3. Intended use
The d&b Z5038 Fixing plate M10 must only be used in
conjunction with applicable d&b loudspeakers.
It can be mounted directly to walls, ceilings or other suitable
surfaces.
NOTICE!
Only use mounting parts (fixing anchors and screws) that are
suitable for the intended application.
An additional 12 mm (0.47") hole is provided on the fixing plate
as a feed-through for the connection cable.
A corresponding fixing template is supplied with these mounting
instructions. Refer to Þ Chapter 1.4. "Fixing template"
on page 4.
Fig. 1: Scope of supply
1. Z5038 Fixing plate M10
d&b Z5038 Fixing plate M10, Mounting instructions (1.0 EN) 3