d&b Z5057 M6 Flying bracket - Manual (Page 4)

5. Product description
[I]
[A]
Fig. 3: Z5057 M6 Flying bracket
[A]
115 [4.5"] 115 115
M10 M10
M8
M10
M8
Fig. 4: Threaded inserts of the outer
bracket [A]
The Z5057 M6 Flying bracket enables M6 loudspeaker cabinets to be
mounted and set to different horizontal or vertical angles.
Outer frame
The tie bar of the outer frame [A] is supplied with to threaded inserts
M8 at the d&b standard spacing (115 mm / 4.5") for attaching the
following adapters:
The Z5024 Loudspeaker stand adapter for attaching the cabinet to a
loudspeaker high stand.
The Z5010 TV spigot with fixing plate for attaching the cabinet to e.g.
trusses in flown applications.
The centre M10 theraded insert of the tie bar can be used to attach a
TV spigot with an M10 bolt.
The two M10 threaded inserts at the edge of the tie bar are intended
for the use with two M10 safety eye bolts (Q9032) to suspend the
cabinet using steel wire ropes or to park the two handbolts
[2] during
storage or transport.
6. Assembly
[2]
[I]
Fig. 5: Attaching the Z5057 M6 Flying
bracket to the cabinet
[F]
Fig. 6: Z5057 M6 Flying bracket
operation
No tools are required.
1. Position the cabinet as shown in Fig. 5.
2. Attach the bracket to the cabinet.
3. Bolt the fixing plate of the inner frame [I] to the M10 threaded
of the cabinet using the two handbolts [2].
4. Hand tighten the handbolts.
7. Operation
The centre of gravity of a M6 stage monitor is in line with the bracket’s
axis of rotation. This prevents the vertical flying angle setting from
limiting freedom of movement by creating a twisting force on the
mounting support. The M6 Flying bracket is locked in place each side of
the cabinet using two handbolts
[F].
Vertical adjustment
1. Slacken the handbolts [F].
2. Set the desired vertical angle.
3. Tighten the handbolts.
Horizontal adjustment
The loudspeaker is aligned horizontally at the Loudspeaker stand
adapter or the TV spigot mounting.
Z5057 Mounting instructions (1.0 EN) Page 4 of 6