d&b Z5377 E6 Swivel bracket - Manual (Page 4)

3. Safety precautions
General safety
Always carry out a visual and functional inspection of the bracket
before use. In case you have any doubt as to the proper functioning
and safety of the bracket, do not use it. Please also refer to section 6.
Maintenance and care on page 5.
Load safety information
The maximum permitted working load of the bracket is 5 kg (11 lb)
(according to BGV C1) which corresponds to the weight of one E6
loudspeaker.
Always align the bracket vertically when using it, whether it is
suspended or placed on top of a loudspeaker stand.
4. Assembly
Fig. 5: Assembly
Fig. 6: Operation
NOTICE
Please do not use other fixing screws than those supplied and
specified.
Make sure the handle always faces to the top whether the cabinet is
intended to be flown or mounted on a high stand as shown in Fig. 2
and 3 on page 3.
The bracket [1] is locked in place on one side of the cabinet using the
hand bolt [2].
No tools required.
1. Fit the bracket [1] into the recessed area of the cabinet side
panel.
2. Fix the bracket to the cabinet using the M10 hand bolt [2].
5. Operation
The center of gravity of the E6 loudspeaker is in line with the bracket’s
axis of rotation. This prevents the vertical flying angle setting from
limiting freedom of movement by creating a twisting force on the
mounting support.
The vertical angle can be set in a range of +90° to –18°.
Vertical alignment
1. Slacken the hand bolt [2].
2. Set the cabinet to the desired vertical angle.
3. Retighten the hand bolt.
Horizontal alignment
The loudspeaker is aligned horizontally via the Loudspeaker stand
adapter or the TV spigot mounting.
Z5377 Mounting instructions (1.2 EN) Page 4 of 6