d&b Z5397 YP Swivel bracket - Manual (Page 4)

1.1. Scope of supply and weight
Please verify the shipment for completeness and proper condition
of the items.
Qty. d&b Code Description
1 Z5397 YP Swivel bracket
1 D2817.EN .01 Z5397 Mounting instructions
Weight 1.6 kg (3.5 lb)
1.2. Safety precautions
General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case there is any doubt as to the proper functioning
and safety of the items, these must be withdrawn from use
immediately.
Operational safety
It is essential to secure the bracket with the securing pin
[S] before
lifting the cabinet or placing it onto a loudspeaker stand.
When using the bracket, all locking devices (securing pin [S] and
fixing lever [F]) must be secured.
Do not under any circumstances unlock the securing pin [S] to
adjust the vertical angle of the cabinet.
Secondary safeties must always be provided and used when flying
or fixing loudspeaker loads overhead.
Load safety information
The Z5397 YP Swivel bracket is designed to support one YP
loudspeaker (Y7P or Y10P).
No additional loads must be added.
The bracket must only be used in an upright position or suspended
vertically as shown in the graphic opposite.
1. Z5397 YP Swivel bracket
d&b Z5397 Mounting instructions 1.2 en 4