d&b Z5409 Horizontal bracket 10S 12S - Manual (Page 7)

Attaching the cabinet to the bracket
NOTICE!
Only use the supplied and specified screws [2], otherwise there a
risk of damaging the threaded inserts.
Always use the spring washers [3] and U washers [4] to prevent
the bolts from slackening.
Tools required:
– Open-ended spanner/wrench (size #17)
1. Attach the cabinet to the prepared bracket.
2. Insert the screws together with the spring and U washers.
3. Align the cabinet and tighten the screws.
4. If you want to fix the set angle, use the supplied spax screw
[5].
d&b Z5409/11 Horizontal bracket 10S/12S, Mounting instructions (1.2 EN) 7