d&b Z5440 Wall mount bracket - Manual (Page 5)

Mounting recommendations
Basically, it does not matter in what position you attach the wall
mount bracket to the cabinet.
However, when you mount the bracket to a complete 24C/24C-E
assembly, we recommend you to attach it to the 24C cabinet
instead of the extender.
It is advisable to attach the bracket to the upper part of the 24C
cabinet close to the connector panel, as shown in the graphic
opposite.
1.3. Intended use
The d&b Z5440 Wall mount bracket must only be used in
conjunction with applicable d&b column loudspeakers.
It is intended for direct and parallel wall mounting with a maximum
distance of 26 mm (1") between the column loudspeaker and the
wall.
The wall plate can be attached in two ways to allow horizontal
aiming of the column in both directions, to the right or to the left.
d&b Z5440 Mounting instructions 1.2 en 5