Dataman 570 Series - Manual (Page 10)

Development kit for DATAMAN 570 series
Programmer’s Guide
measurements, because the random nature of this process causes measurements with
the same clock phase.
When the random sampling method is used, it is necessary to trigger with a well
defined and stable waveform.
2.5.2. Measurement in sampling mode
Synthesis and interpolation of the samples is done automatically by the DK.
Application received synthetized data. The only difference between real mode and
sampling mode is that it is necessary to perform more acquisition loops to get a real
image of the signal. Use GetReconstructionPercentage function to get the quality of
the signal image (ratio of the measured and calculated samples).
- 10 -