Cleaning and troubleshooting, Cleaning – DynaScan 46″ Video Wall Super Narrow Bezel LCD DS46LX2 User Manual

Page 33

Advertising
background image

24

6. Cleaning and Troubleshooting

6.1. Cleaning

Caution When Using the Display

• Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due

to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any

body parts are brought too close. Placing any object near the top of the display could also result in heat related damage to the

object as well as the display itself.

• Be sure to disconnect all cables before moving the display. Moving the display with its cables attached may damage the cables

and thus cause fire or electric shock.

• Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of cleaning or maintenance

procedure.

Front Panel Cleaning Instructions

• The front of the display has been specially treated. Wipe the surface gently using only a cleaning cloth or a soft, lint-free cloth.
• If the surface becomes dirty, soak a soft, lint-free cloth in a mild detergent solution. Wring the cloth to remove excess liquid. Wipe

the surface of the display to remove dirt. Then use a dry cloth of the same type to dry.

• Do not scratch or hit the surface of the panel with fingers or hard objects of any kind.
• Do not use volatile substances such as insert sprays, solvents and thinners.

Cabinet Cleaning Instructions

• If the cabinet becomes dirty, wipe the cabinet with a soft, dry cloth.
• If the cabinet is extremely dirty, soak a lint-free cloth in a mild detergent solution. Wring the cloth to remove as much moisture as

possible. Wipe the cabinet. Use another dry cloth to wipe over until the surface is dry.

• Do not allow any water or detergent to come into contact with the surface of the display. If water or moisture gets inside the unit,

operating problems, electrical and shock hazards may result.

• Do not scratch or hit the cabinet with fingers or hard objects of any kind.
• Do not use volatile substances such as insert sprays, solvents and thinners on the cabinet.
• Do not place anything made from rubber or PVC near the cabinet for any extended periods of time.

DS32CR \DS42CR \DS46CR \DS46LX Series

Advertising