Future Automation EAD2 - Manual (Page 11)

In
st
all
at
io
n
: S
ta
ge
6
Page 10 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
EAD2 - Electric Advance & Drop V2
Tilt Adjustment (If Required)
To adjust the tilt of the screen when in the up position, run into the out position, then
loosen the internal bolt and the locking nuts so the locking boss can slide up or down.
Locking Boss
Locking Nuts
Internal Bolts