Future Automation EAD2 - Manual (Page 7)

Screen Positioning
Establish the mechanism positioning behind the screen and where the mounting
holes are so the correct height is achieved when fixing to the wall.
Make sure the mechanism is in the IN position when doing this.
To establish clearances and general requirements please refer to the EAD2 Tech
Sheet.
A recommended mounting option is to recess the mechanism into the wall so the
screen sits flush with the wall in the up position.
In
st
all
at
io
n
: S
ta
ge
2
Page 6 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
EAD2 - Electric Advance & Drop V2
Wall mount plate and fixing holes



Screen mounting position
X
Y