Future Automation PD - Manual (Page 7)

In
st
all
at
io
n
: S
ta
ge
2
Page 6 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PD1 & 2 - Projector Drop Mechanism
- THE BOX MUST BE EASY TO ACCESS!
- Wire up the control box, refer to page 12 Electrical Connection
- Connect the control box to the mains power supply
- Connect the infrared remote sensor even if you are going to
use switch control
- Cables can be easily extended
- There is no manual drop function, access is required for servicing
Timber Joists
Inside faces of
joists need to take
the fixing holes
Projection
direction
Creating the void in the ceiling
- Hole size for products: PD1 - 580mm [22.8”] x 580mm [22.8”]
PD2 - 630mm [24.8”] x 630mm [24.8”]
- Clear space free from joists and other objects
- Secure timber joists in place to support the unit front and back
- ORGANISE CABLES READY TO THREAD THROUGH THE UNIT
Control box setup