Holland Electronics ST-4000 - Manual (Page 6)

MAIN USER INSTRUCTIONS
1 Meter Set-Up Features
Each of the following set-up functions is activated by first pressing the 0/ 2 nd F key followed by
the SET key.
1.1 AUTO OFF TIME
The meter can be set to turn off after 5 minutes of inactivity or to remain on continuously.
Press “” or “” to point “” to “Auto Off Time”. Press ENT key.
Use “” or “” to choose desired mode. Press ENT key.
LCD will display:
1.2 AUDIO SET
Enable or disable the speaker to monitor the audio while measuring audio carrier signal levels.
Press “” or “” to point “” to Volume Set. Press ENT key.
Use “” or “” to choose desired mode. Press ENT key.
LCD will display:
1.3 LEVEL UNIT
Select the desired measurement scale of dB
V or dBmV
Press “” or “” to point “” to “Level Unit”. Press ENT key.
Use “” or “” to choose desired mode. Press ENT key.
LCD will display:
4
Audio On
Audio Off
dBµV Enable
dBm V Disable
5 Minutes off
Always On