ILUMINARC Ilumicode™ Addresser - Manual (Page 6)

Introduction
2 Ilumicode V 2.21 User Manual Rev. 3
There are no
user-serviceable
parts inside this
product. Any reference to
servicing you may find in
this User Manual will only
apply to properly certified
ILUMINARC® technicians.
Do not open the housing
or attempt any repairs
unless you are certified to
do so.
Please refer to all
applicable local
codes and
regulations for the proper
installation of this product.
Keep this manual
for future
consultation. If
you sell this
product to another user,
make sure that they also
receive this manual.
In the unlikely
event that your
Ilumicode V 2.21
may require service,
please contact
ILUMINARC® Technical
Support.
Safety Notes
Please read all the following Safety Notes carefully because they include important
information on how to install, use, and maintain this product safely or any Iluminarc product
connected to it.
Personal Safety
· Avoid direct eye exposure to the light source while the product is on.
· Always disconnect this product from its power source before servicing.
· Always connect this product to a grounded circuit to avoid the risk of electrocution.
Mounting and Installation
· This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture.
· Make sure there are no flammable materials close to this product while it is operating.
· CAUTION: When transferring product from extreme temperature environments,
(e.g. cold truck to warm humid ballroom) condensation may form on the internal
electronics of the product. To avoid causing a failure, allow product to fully acclimate
to the surrounding environment before connecting it to power.
Power and Wiring
· Always make sure that you are connecting the products associated to the Ilumicode
V 2.21 to the proper voltage, as per the specifications in the product’s manual or on the
product’s sticker.
· Never connect this product to a dimmer pack.
Operation
· The maximum ambient temperature is 113° F (45° C). Do not operate this product at a
higher temperature.
· In case of a serious operating problem, stop using this product immediately!