Junger Audio C8612 - Dolby® D/D+/AAC encoder - Manual

digital audio
modular
processing system
C8000
Dolby Digital / Digtal plus / Pulse (AAC) encoder
C8612
1/20
features
• Dolby Digital (AC3), Dolby Digital plus, HE-AAC, AAC encoder(s)
• Two independent (5.1 and 2.0) encoders
• Supports associated services (audio description incl. BBC "Warble Tone" technology)
• 5.1 transcoding from Dolby Digital (AC3) to Dolby Digital plus
• Stream multiplexing for single PID applications
• RS485 – RDD6 - metadata input
• 16 Metadata presets
• 16 Setup presets
• 8 bus routing presets
• Encoded output available on internal bus as well as alternately on BNC monitor output
• Remote control (web interface) via C8702 frame controller
block diagram
C8612 Carrier Board
9-pin
RDD6 Metadata
SYNC
System sync
Inertface
Module Controller
Encoder 1
L / R
CAN-BUS
Interface
BACK PLANE AUDIO INTERFACE 32 Bus Lines (2Ch or 8 Ch mux mode)
AUDIO ROUTER / METADATA EXTRACTOR
GPI/O Handling
Metadata Management
Frame Controller Commmunication
Preset Management
Front Panel Status Display
DOLBY® CAT561 OEM Board (Firmware 2.4.0.3 and higher)
BNC
Output
AES3id
STATUS
LEDs
OEM Board Control
6
C
h
2
C
h
2
C
h
2
C
h
GENERAL Configuration for two independent encoders
Encoder 2
C / LFE
Ls / Rs
L / R
Metadata Multiplexer
Consumer Metadata
Metadata Multiplexer
Consumer Metadata