Technical specifications, 1 sw 112 – KLING & FREITAG K&F SWi 118E User Manual
Page 27
User’s Manual
K&F ‘SW’ Series Subwoofer Systems
KLING & FREITAG GMBH ©1998 - 2015
Version 5.1, 29.05.2015
Page 27 of 27
13. Technical Specifications
13.1
SW 112
Speaker
Design
Bass reflex system with exponential
tunnel geometry
Frequency range -10 dB
35 Hz --- 2.5 kHz
Frequency range ±3 dB
41 Hz - 350 Hz
Crossover frequencies
max. 110 Hz with optional
low-pass filter (XO 'ON')
Power handling
500 W nominal
1)
1000 W programme
2)
Sensitivity 1 W / 1 m
92 dB (45 Hz - 350 Hz)
3)
93 dB (40 Hz - 110 Hz) with optional low-
pass filter (XO 'ON')
Max. SPL
124 dB (peak / 1 m / free field,
equivalent 130 dB half room)
Components
1 x 12‘‘ long excursion chassis, 100 mm
voice coil, internal and external ventilation
Impedance (nom.) XO 'ON'
6 Ω, Zmin. 4 Ω
Without crossover, XO 'OFF' 8 Ω, Zmin. 6 Ω
Connectors
2 x Speakon NL4MP (1+/1-)
Enclosure
15 mm frame reinforced Multiplex plywood
with highly resistant black structured paint (PU)
1 ergonomic handle
K&M mounting plate M20 for
distance rod, 4 non-abrasive
plastic feet,
stacking foot grooves
for stacks of identical
enclosures
ball-proof steel grille with exchangeable
black acoustic foam
Dimensions (W x H x T)
470 x 370 x 520 mm
Weight
27 kg / 28.7 kg with low-pass filter
Options
'XO' switchable low-pass filter,
'Barrier strip' instead of Speakon connector,
'100 Volt' with 300 VA toroidal transformer
(29.5 kg) --- not in combination with option 'XO'
‘Suspension‘ with 6 flying points ‘allsafe JUNGFALK'
'Outdoor Mobile'
Special finish in RAL colours
Accessories
see catalogue or visit www.kling-freitag.de
1)
Pink noise 40 --- 400 Hz, 2 h;
2)
as
1)
but with 50% duty cycle;
3)
2.83 Vrms
,
free field