Monroe Electronics R190A - Manual (Page 15)

Section 2 Remote Control
13
General Remote Control Overview
In its basic configuration, the R190A is a simple remote control that allows the user
to command 4 DPST relays at a remote location. These commands are
transported from any computer with a web browser through a network connection
to the R190A. Items within the power limits of the relay contacts can be directly
connected to the R190A and be easily controlled from any network location. In
addition, the R190A can be directly connected to any of the contact closure
controlled switches manufactured by Monroe Electronics so that audio/video, IF or
RF type switching can be accomplished.
Set-up and configuration is done by using the built-in web page where IP address,
password and relay labels are entered.
Once configured for the users network, on, off or momentary relay control can be
accomplished by clicking a button on the web page.